The right part, precisely toleranced, dispatched fast.

AVL-ABP-01

Cold Feed Conveyor Belt

Heat-resistant EP-fabric rubber conveyor belt rated for continuous cold-aggregate feed duty in batch plant cold-feed systems.

AVL-ABP-02

Cold Bin Liner Plate

Abrasion-resistant AR-grade steel liner plates protecting cold feed bin floors, walls, and hopper angles from aggregate impact and sliding wear.

AVL-ABP-03

Cold Bin Gate and Actuator

Variable-aperture metering gate and electric or pneumatic actuator controlling aggregate flow rate from each cold feed bin compartment.

AVL-ABP-04

Drying Drum Lifting Flight

Zone-matched internal steel lifting flights that cascade aggregate through the burner gas stream for efficient drying and heat transfer.

AVL-ABP-05

Drum Riding Ring (Tyre)

Precision-machined alloy steel riding ring encircling the drying drum shell and transmitting drum weight to the support rollers.

Drum Support Roller and Bearing Assembly

AVL-ABP-06

Drum Support Roller and Bearing Assembly

Induction-hardened steel support roller and self-aligning spherical roller bearing assembly carrying the rotating drum load at each riding-ring station.

AVL-ABP-07

Drum End Seal Ring

High-temperature labyrinth or spring-loaded segmented seal ring bridging the rotating drum shell and fixed hood at drum inlet and outlet.

Elevator

AVL-ABP-08

Hot Elevator Bucket

Heavy-duty hard-faced carbon steel bucket for the hot aggregate elevator, scooping and carrying dried aggregate from the drum boot to the vibrating screen.

+ 11 more Asphalt Batch Mix Plant parts →

AVL-DMP

Asphalt Drum Mix Plant parts

AVL-DMP-01

Drum Shell

Precision-rolled cylindrical shell forming the structural and thermal core of the AVL-DMP drum dryer-mixer.

AVL-DMP-02

Segment / Riding Ring

Heavy-duty cast steel riding ring providing the drum's primary rotating bearing surface on trunnion rollers.

AVL-DMP-03

Dryer Lifting Flights

Wear-resistant internal flights that cascade aggregate through the drying zone for maximum heat transfer efficiency.

AVL-DMP-04

Mixing Flights

Specially profiled internal flights that tumble heated aggregate with bitumen in the drum mixing zone.

AVL-DMP-05

Drum Inlet Chute

Heavy-duty abrasion-lined inlet chute directing cold aggregate into the rotating drum feed end with controlled air sealing.

AVL-DMP-06

Drum Outlet Chute

High-temperature discharge chute channelling finished hot-mix asphalt from the drum to the elevator or surge silo.

AVL-DMP-07

Burner Mounting Plate

Precision-machined steel mounting plate securing the burner assembly to the drum and providing accurate flame-centreline alignment.

AVL-DMP-08

Drum Insulation

Multi-layer ceramic-fibre and mineral-wool insulation system minimising drum heat loss and reducing fuel consumption.

+ 30 more Asphalt Drum Mix Plant parts →

AVL-MAP

Mobile Asphalt Plant parts

AVL-MAP-01

Drum Shell Liner Plate

Heat-resistant manganese-chrome steel liner protecting the drying drum shell from impact abrasion and thermal fatigue during continuous aggregate processing.

AVL-MAP-02

Drum Lifting Flight Set

Precision-formed AR400 steel flights that cascade aggregate through the burner flame zone for maximum heat transfer and moisture removal.

AVL-MAP-03

Burner Nozzle and Tip Set

EDM-machined precision atomisation nozzles governing fuel droplet size, flame shape and combustion efficiency in the AVL-MAP burner.

$Burner Throat Refractory Block$ Burner & Heating

AVL-MAP-04

Burner Throat Refractory Block

High-alumina refractory block lining the AVL-MAP burner throat to protect the drum entry zone from peak combustion temperatures of up to 1 200 °C.

AVL-MAP-05

Bitumen Pump Mechanical Seal Kit

SiC-seat mechanical seal kit for the AVL-MAP bitumen circulation pump, preventing high-temperature binder leaks and protecting against shaft damage.

AVL-MAP-06

Bitumen Tank Heating Coil

Pressure-tested seamless steel heating coil maintaining bitumen at pumpable temperature in the AVL-MAP insulated storage tank via thermic oil or steam.

AVL-MAP-07

Cold-Feed Conveyor Belt

Multi-ply EP rubber conveyor belt transporting blended aggregate from cold-feed bins to the AVL-MAP drying drum at controlled production rates.

AVL-MAP-08

Feed Bin Wear Liner Plate

AR400/AR450 abrasion-resistant steel panels protecting the AVL-MAP cold-feed bin walls from impact and sliding wear during aggregate loading.

+ 10 more Mobile Asphalt Plant parts →

AVL-WMM

Wet Mix Macadam Plant parts

AVL-WMM-01

Paddle Tip Set (Mn-Steel)

High-manganese paddle tips engineered to work-harden under impact, sustaining aggressive WMM mixing cycles with maximum uptime.

AVL-WMM-02

Mixer Trough Liner Plate

Replaceable Mn-steel liner plates protecting the mixer trough shell from aggregate abrasion and impact.

AVL-WMM-03

Paddle Shaft Bearing Assembly

Sealed heavy-duty pillow-block bearing assemblies supporting WMM twin mixer shafts under sustained high-load mixing duty.

AVL-WMM-04

Discharge Gate Rubber Seal

Precision-profiled EPDM perimeter seal that eliminates wet aggregate leakage at the mixer discharge gate during the mixing cycle.

AVL-WMM-05

Paddle Arm Bolt Set

Grade 10.9 high-tensile bolt kits securing paddle arms and tips to the mixer shaft under continuous impact loading.

AVL-WMM-06

Mixer End Plate Dust Seal

Precision multi-lip dust seals blocking aggregate migration at the mixer shaft end plates to protect bearing housings.

AVL-WMM-07

Aggregate Belt Feeder Belt

Multi-ply EP rubber feeder belts for WMM cold-feed hopper bays, rated for continuous abrasive aggregate duty.

AVL-WMM-08

Collection Conveyor Belt

High-tensile EP rubber conveyor belt collecting all proportioned aggregate fractions and delivering them to the AVL-WMM mixer inlet.

+ 10 more Wet Mix Macadam Plant parts →

AVL-CBP

Concrete Batching Plant parts

AVL-CBP-01

Twin-Shaft Mixing Arm Assembly

Hadfield Mn13 and Hardox-tipped mixing arm pairs for AVL-CBP twin-shaft mixers — precision-balanced for uniform, high-intensity concrete production.

AVL-CBP-02

Mixer Trough Liner Plate

Hardox 400/450 wear liner plate sets protecting the mixer trough floor and sidewalls from aggregate abrasion on AVL-CBP plants.

AVL-CBP-03

Mixer Shaft End Oil Seal

Multi-lip NBR/PTFE rotary seal preventing cement slurry ingress and lubricant loss at AVL-CBP mixer shaft bearing housings.

AVL-CBP-04

Discharge Gate Rubber Seal

Moulded 60–70 Shore A rubber seal ensuring concrete-tight closure of the AVL-CBP twin-shaft mixer discharge gate.

AVL-CBP-05

Twin-Shaft Mixer Gearbox

Heavy-duty helical/bevel-helical reduction and synchronising gearbox driving both shafts of the AVL-CBP twin-shaft concrete mixer.

AVL-CBP-06

Aggregate Weigh Hopper Load Cell

OIML C3/C4 compression load cells for aggregate weigh hoppers on AVL-CBP concrete batching plants — calibrated, IP67, shock-rated.

AVL-CBP-07

Cement Weigh Hopper Load Cell

High-resolution OIML C3 stainless steel load cells for cement and SCM weigh hoppers on AVL-CBP concrete batching plants.

AVL-CBP-08

Admixture Peristaltic Pump Tube

NR, EPDM, and Viton peristaltic pump tubes for precise admixture dosing on AVL-CBP concrete batching plants.

+ 10 more Concrete Batching Plant parts →

AVL-BPD

Bitumen Pressure Distributor parts

AVL-BPD-01

Spray Bar Flat-Fan Nozzle Set

Precision flat-fan nozzles delivering uniform bitumen coverage across the full spray bar width.

AVL-BPD-02

Spray Bar Section Valve

Pneumatically or hydraulically actuated section valve for precise boom-width control and clean spray cutoff.

AVL-BPD-03

Spray Bar Hydraulic Fold Cylinder

Double-acting hydraulic cylinder that raises, lowers and folds spray bar wings safely and repeatably.

AVL-BPD-04

Spray Bar End Cap and Drain Plug

Pressure-tight bar end cap with integrated drain plug for safe spray bar flushing and bitumen recovery.

AVL-BPD-05

Main Bitumen Gear Pump Assembly

Heavy-duty external gear pump assembly for continuous high-temperature bitumen transfer and spray delivery.

AVL-BPD-06

Pump Drive Shaft Mechanical Seal

High-temperature mechanical face seal preventing bitumen from tracking along the gear pump drive shaft.

Full-Circulation Ring Main Diverter Valve

AVL-BPD-07

Full-Circulation Ring Main Diverter Valve

Multi-port diverter valve switching the bitumen circuit between spray delivery, full-circulation return and fill/discharge modes.

AVL-BPD-08

Bitumen Inlet Filter / Strainer Basket

Stainless steel basket strainer protecting the pump and nozzles from particulate debris entrained in loaded bitumen.

+ 10 more Bitumen Pressure Distributor parts →

AVL-BST

Bitumen Heating & Storage Tank parts

Pump & Transfer

AVL-BST-01

Bitumen Gear Pump

Jacketed hot-oil gear pump that transfers bitumen at temperature to the plant or distributor.

Heating

AVL-BST-02

Thermic Fluid Heating Coil

Seamless coil that circulates hot thermic fluid to heat the bitumen evenly.

Heating

AVL-BST-03

Burner Set

Direct-fired oil/gas burner unit for tanks with a fire-tube heating system.

AVL-BST-04

Temperature Controller & Sensor

Digital thermostat and probe that hold the bitumen at set temperature.

Shell

AVL-BST-05

Insulation & Cladding

Mineral-wool insulation and outer sheet that minimise heat loss.

AVL-BST-06

Level Indicator

Shows the bitumen level inside the tank for safe filling and dispensing.

Pump & Transfer

AVL-BST-07

Inlet / Outlet Valve

Jacketed valves that control bitumen flow in and out of the tank.

Shell

AVL-BST-08

Tank Shell

The heavy welded steel body that holds the bitumen charge.

+ 2 more Bitumen Heating & Storage Tank parts →

AVL-MRB

Mechanical Road Broom parts

Sweeping Unit

AVL-MRB-01

Cylindrical Brush Assembly

Full-width rotating wire-brush cylinder that sweeps the road.

Sweeping Unit

AVL-MRB-02

Brush Shaft

Machined shaft that carries and drives the brush cylinder.

AVL-MRB-03

Drive Gearbox

Reduction gearbox that drives the brush at working speed.

AVL-MRB-04

Drive Chain & Sprocket

Transmits drive from the gearbox to the brush shaft.

Frame

AVL-MRB-05

Height-Adjustment Screw

Screw handle that sets the brush height and pressure.

Running Gear

AVL-MRB-06

Road Wheel

Pneumatic tyre wheel carrying the broom frame.

AVL-CS

Chip Spreader parts

AVL-CS-01

Spreader Hopper

Receiving hopper that holds the stone chips.

Spreading Unit

AVL-CS-02

Spreading Roller

Roller that lays an even carpet of chips onto the road.

Spreading Unit

AVL-CS-03

Adjustable Gate

Gate that sets the chip flow / spread rate.

Spreading Unit

AVL-CS-04

Agitator Shaft

Shaft that keeps chips flowing evenly to the roller.

Frame

AVL-CS-05

Mounting Frame

Frame that bolts the spreader to the tipper truck.

AVL-PF

Mechanical Paver Finisher parts

Screed

AVL-PF-01

Screed Plate

Heated plate that levels and finishes the asphalt mat.

Screed

AVL-PF-02

Tamping Bar

Bar that pre-compacts the mix ahead of the screed.

AVL-PF-03

Receiving Hopper

Front hopper that receives hot mix from the tipper.

AVL-PF-04

Spreading Auger

Auger that spreads the mix across the screed width.

Hydraulics

AVL-PF-05

Hydraulic Cylinder

Cylinder that lifts and adjusts the screed.

AVL-PF-06

Diesel Engine

Engine that powers the paver's drive and hydraulics.

AVL-FBF

Four Bin Feeder parts

AVL-FBF-01

Bin Hopper

One of the four aggregate hopper bins.

AVL-FBF-02

Feeder Belt

Belt that draws aggregate from a bin.

AVL-FBF-03

Belt Idlers

Rollers that support and shape the feeder belt.

AVL-FBF-04

Feed Gate

Adjustable gate that sets the draw rate from a bin.

AVL-FBF-05

Gear Motor

Geared motor that drives a feeder belt.

AVL-DU

Dryer-Mixer Drum Unit parts

AVL-DU-01

Drum Shell

The main rotating drum body.

AVL-DU-02

Riding Ring

Ring on which the drum rides on the rollers.

AVL-DU-03

Trunnion Roller

Roller set that supports the rotating drum.

AVL-DU-04

Burner Set

Oil/gas burner that fires the drum.

AVL-DU-05

Girth Gear & Pinion

Gear set that rotates the drum.

AVL-DU-06

Chimney

Exhaust stack for the dryer gases.

AVL-CC

Control Cabin parts

AVL-CC-01

Electrical Control Panel

The floor-standing plant control panel housed in the cabin.

AVL-CC-02

Window Glazing

Tinted glass window units of the cabin.

AVL-CC-03

Glazed Door

Lockable glazed access door.

AVL-CC-04

Cabin Frame & Panels

The steel frame and insulated wall panels.